Sokkia Prolink 1.15 Software



  1. Sokkia Prolink 1.15 software, free download

Oct 11, 2016  ProLink Software. ProLink was Download version 1.15 of ProLink To transfer a file from a Sokkia Total Station you can use the 'receive' function in ProLink. 4 696 users of Software Informer have this software installed on their The most commonly used version of Prolink is 1.15, with over 95% of all. ProLINK is a Shareware software in. Lucky block mod xbox 360 download. Spectrum Link software is a data import/export utility software. Latest Version 8.2.3: Released October 2011: Features of Spectrum Link includes.

SOKKIA CO.,LTD. – 18.6MB – Shareware – Windows

Overview

SOKKIA Link is a Shareware software in the category Education developed by SOKKIA CO.,LTD.

It was checked for updates 220 times by the users of our client application UpdateStar during the last month.

The latest version of SOKKIA Link is 8.2.3, released on 03/15/2018. It was initially added to our database on 04/24/2008. The most prevalent version is 5.30, which is used by 71 % of all installations.

SOKKIA Link runs on the following operating systems: Windows. The download file has a size of 18.6MB.

Users of SOKKIA Link gave it a rating of 4 out of 5 stars.

Write a review for SOKKIA Link!

220 users of UpdateStar had SOKKIA Link installed last month.
08/01/2007 Wondershare Filmora Scrn(Build
09/07/2020 Kate's Video Toolkit 8.158
09/07/2020 Fake Webcam 7.3.497
09/07/2020 EMCO MSI Package Builder Enterprise 8.1
09/07/2020 Fake Voice 7.158
Secure and free downloads checked by UpdateStar
Stay up-to-date
with UpdateStar freeware.
09/01/2020 Firefox 80.0.1 update with bug fixes available
08/25/2020 Firefox 80 and Tor Browser 9.5.4 updates available
08/18/2020 Chrome Chrome security update available
08/12/2020 Security updates available for Chrome and Edge
08/11/2020 Adobe closes vulnerabilities in Acrobat and Lightroom
  • » sokkia link download for windows 8 1
  • » download sokkia link free
  • » sokkia link download soft waare
  • » تنزيل سوكيا لينك
  • » sokkia link инструкция
  • » sokkia linq
  • » sokkia link gratis
  • » sokkia link softwher
  • » como descargar sokia link
  • » sokia link downloaf

ProLink Software

ProLink was last updated in July 2001. Its current freebee replacement is Spectrum Link, or for a maintained product go to the Magnet Office products.

The information below is for existing ProLink users, who may continue to use ProLink for its extensive export customisation functionality.

Known issues
Downloading Total Station or SDR datalogger to the PC
'I'm importing an ASCII file and ProLink crashes'
Download version 1.15 of ProLink
'XFM not found' (GPS)
'Not an XFM project .. backed out' (GPS)
Known or unknown Base coordinates - what's the go? (GPS)
Interfacing with third party software - Landmark, Civilcad

Here are a few things to be aware of:

1. ProLink requires Administrator rights when using projects. Each project is stored in a directory of its own.

2. (GPS RTK only) Prolink does not use a geoid model, so be aware you may find height differences between the results from thet work

5. (GPS RTK only). Reducing RTK data in Prolink: Antenna height of second and subsequent base stations in the same file are ignored - so if the second base station has a different antenna height, you'll see incorrect elevations for all points observed using that second base station. This only seems to happen on certain Operating Systems.

6. When re-opening a project, the co-ordinate order reverts to Northing, Easting, even if you set the default to Easting, Northing.

To transfer a file from a Sokkia Total Station you can use the 'receive' function in ProLink. After you have 'received' the file on the PC, you can 'import' it into a ProLink project.

For most Sokkia Total Stations use the SDR33 (SDR) device. You'll need to set the PC ready to receive and then 'send' the job from the Total Station.

If your Total Station or SDR check the following:

  • are you connected to the correct com port? In case of doubt, try all COM ports.
  • are the communication parameters the same on the PC and in the instrument? Check the speed (baud rate) but also the parity, data bits, stop bits. Leave Xon/Xoff unchecked and handshake 'none' for now.
  • is the com port available? Not occupied by Activesync, for instance.

Older models like the SET2Cii and other C series with built-in Sokkia data cards will use the 'SCR2' device (set to 9600 baud regardless of RS232 speed in instrument !) to communicate. Set File Type in the left hand screen to *.SCR. These instruments should be set 'On Line' in the Menu/Card/Comms menu and will receive a *.scr (not SDR) file to the PC.
The same settings apply if you're using an external SCR2 card reader.

If you have (intermittent) communication problems between the SDR33 and the Total Station, the cable attached to the SDR33 is likely to be faulty. Once you have a new cable, make sure not to squash the cable by inserting the SDR33 head first into the carry pouch.

' I'm importing an ASCII file and ProLink crashes '

Have a look (with e.g. Notepad, not MSWord) at thell get an error message if following files are recorded on other zones or did not use an .xfm file.

1. If you do not have known coordinates for the GPS base station, use 'unknown' setting. You can now enter completely arbitrary coordinates. But you must visit a known point with the rover and perform a calibration on the setting - and you don't need to do a calibration. VideoPad - Download Now - NCH Software - Download Free .... But visit a known point as a check.

'Known' implies that the initial coordinate system will be using the entered known northing and easting as starting point.
'Unknown' implies that the initial coordinate system will use the autonomous GPS coordinates, converted to northing and easting. This should get your job within a few meters.

How to install piano one fl studio. Similarly to the xfm setting of the first file, it is the setting in the first file which determines whether 'known' or 'unknown' initial coordinates are used in a ProLink project.

3. In case you entered known coordinates for your base station, but left the Base Coord field 'unknown' by accident , and you did not do a calibration, you will find all of your coordinates off by the same amount. To correct this situation, change 'arbitrary' to 'known' in ProLink's field book view, export the field book file as SDR file and import this new file into a NEW project. Or import another file with 'known' setting first ..

Prolink Software Corporation is committed to respecting and protecting your privacy. To that end, we have prepared this privacy statement to disclose and describe our information gathering and dissemination practices for this website.

Notice and Disclosure

In general, you may visit this website without identifying yourself or revealing any personal information. Prolink collects domain information from your visit to customize and improve your experience on our website. Some portions of this website may require you to give us personally identifiable information, which is information that enables us to identify you, such as your name, email or other address. If you opt to provide this information, we may also use it for purposes such as verifying your identity, sending you information, or contacting you.

Cookies

Portions of this website may use cookies to keep track of your visit, or to deliver content specific to your interests. A cookie is a small amount of data transferred to your browser and read by the Web server that placed it there. It works as a sort of identification card, recording your preferences and previously entered information. You can set your browser to notify you when you receive a cookie, giving you the chance to accept or reject it.

Sokkia
Contact Us

If you have any questions or comments about our privacy statement or practices, please contact us via email at info@prolinksoftware.com with the words 'PRIVACY POLICY' in the subject line. Prolink Software reserves the right to modify or update this privacy statement at any time without notice.
Last updated February 13, 2018.